Plastic 1.50

Futurise  Progressive (Uncoated, Hard Coated)

Diameter Additions Min Fitting Height
75mm Decentered, 2.5mm 0.75D to 3.50D in 0.25D steps 18mm
Nominal Base Curve True Base Curve Edge Thickness (mm) Center Thickness (mm) Nominal Back Curve (D) Sag Height @50mm
1.50 1.50 14.5 8.7 6.75 0.927
3.25 3.21 14.5 11.0 6.75 1.904
5.25 5.22 10.0 9.3 6.75 3.126
7.25 7.18 7.1 10.5 6.75 4.362

MICRO Progressive (Hard Coated)

Diameter Additions Min Fitting Height
70mm, 75mm
Decentered 2.5mm		 1.00D to 3.50D in 0.25D steps 16mm
Nominal Base Curve True Base Curve Edge Thickness (mm) Center Thickness (mm) Nominal Back Curve (D) Sag Height @50mm
2.00 2.06 14.5 12.2 4.25 1.216
4.25 4.26 11.0 8.2 6.75 2.536
5.75 5.93 9.0 9.1 6.75 3.565
7.75 7.83 8.5 11.2 6.75 4.788

top

Flat Top 28 (Uncoated, Hard Coated)

Diameter Additions Segment Size Segment Placement
70mm 0.75D to 3.50D in 0.25D steps
4.50D to 6.00D in 0.50D steps		 28mm 5mm in
5mm down
Nominal Base Curve True Base Curve Edge Thickness (mm) Center Thickness (mm) Nominal Back Curve (D) Sag Height @50mm
0.50 0.48 17.0 9.4 6.75 0.284
2.00 2.03 14.5 8.8 6.75 1.198
4.25 4.27 11.0 8.0 6.75 2.541
5.25 5.17 11.0 9.1 6.75 3.095
6.25 6.17 11.0 10.3 6.75 3.095
8.25 8.17 7.5 10.3 6.75 5.009
10.50 10.58 7.5 13.7 6.75 6.683

top

Flat Top 35 (Uncoated)

Diameter Additions Segment Size Segment Placement
70mm 0.75D to 4.00D in 0.25D steps 35mm 5mm in
5mm down
Nominal Base Curve True Base Curve Edge Thickness (mm) Center Thickness (mm) Nominal Back Curve (D) Sag Height @50mm
0.50 0.48 17.0 9.4 6.75 0.284
2.00 2.03 14.5 8.8 6.75 2.448
4.25 4.11 11.0 8.0 6.75 2.448
6.25 6.22 11.0 10.3 6.75 3.753
8.25 8.38 7.5 10.3 6.75 5.153
10.50 10.58 7.5 13.7 6.75 6.683

top

7 x 28 (Uncoated)

Diameter Additions Segment Size Segment Placement
70mm 1.00D to 4.00D in 0.25D steps
4.50D to 6.00D in 0.50D steps		 7mm,
28mm		 5mm in
1mm down
Nominal Base Curve True Base Curve Edge Thickness (mm) Center Thickness (mm) Nominal Back Curve (D) Sag Height @50mm
2.00 2.03 14.5 8.8 6.75 1.199
4.25 4.11 11.0 8.0 6.75 2.448
6.25 6.22 11.0 10.3 6.75 3.753
8.25 8.38 7.5 10.3 6.75 5.153
10.50 10.58 7.5 13.7 6.75 6.683

top

Semi-Finished Single Vision (Uncoated, Hard Coated)

Diameter      
70mm      
Nominal Base Curve True Base Curve Edge Thickness (mm) Center Thickness (mm) Nominal Back Curve (D) Sag Height @50mm
0.50 0.42 17.0 9.4 6.75 0.248
2.00 2.03 14.5 8.8 6.75 1.198
4.25 4.27 11.0 8.0 6.75 2.541
5.25 5.17 11.0 9.1 6.75 3.098
6.25 6.17 11.0 10.3 6.75 3.718
7.25 7.17 7.0 7.0 6.75 4.356
8.25 8.17 7.5 10.3 6.75 5.009
9.25 9.17 6.8 10.0 6.75 5.687
10.25 10.25 7.5 13.7 6.75 6.445

top

Legend
NC - Uncoated
HC - Hard coated
AR - Standard Anti Reflective Coating (with enhanced Hydrophobic)
SAR - Super Hydrophobic Anti Reflective Coating (easy to clean)

Finished Single Vision

Diameter Sphere 000 025 050 075 100 125 150 175 200 225 250
60mm NC +025 to +425 • • • • • • • • • • •
60mm NC +450 to +600 • • • • • • • • •    
60mm NC 000 • • • • • • • • • • •
65mm NC, HC, AR, SAR +025 to +425 • • • • • • • • • • •
65mm NC, HC, AR, SAR +450 to +600 • • • • • • • • •    
70mm NV, HC, AR, SAR +025 to +425 • • • • • • • • • • •
70mm NV, HC, AR, SAR +450 to +600 • • • • • • • • •    
70mm NV, HC, AR, SAR 000 to -350 • • • • • • • • • • •
70mm NV, HC, AR, SAR -375 to -400 • • • • • • • • •    
70mm NV, HC, AR, SAR -425 • • • • • • • •      
70mm NV, HC, AR, SAR -450 • • • • • • •        
70mm NV, HC, AR, SAR -475 • • • • • •          
70mm NV, HC, AR, SAR -500 • • • • •            
70mm NV, HC, AR, SAR -525 • • • •              
70mm NV, HC, AR, SAR -550 • • •                
70mm NV, HC, AR, SAR -575 • •                  
70mm NV, HC, AR, SAR -600 •                    

top